ServSwitch over IP solutions. • ServSwitch Wizard IP • Remote acces • For remotely accessing and controlling servers, many administrators use remote access software. But is it enough? After all, it's operating system dependent and doesn't work...

...operates on. Ethernet switches are usually Layer 2 (Data Link Layer) devices and sort traffic using physical (MAC) addresses. Routers are Layer 3 (Network Control Layer) devices and manage network traffic using network addresses. Media converters,...

...the benefits of KVM switching technology • KVMoIP products combine the advantages of remote access software with the benefits of KVM switching technology. Like most KVM switches, KVMoIP products don’t require any software to be loaded on the hos...

...through networking switches to get extra-long distances, beyond the specified cabling distances of 100 meters per the Ethernet standard. • Because IP-based extenders are based on standardized Ethernet protocols, you can even use media converter...

...and 100BASE-FX! • Switch between different wiring systems without adding to your overall network repeater count. • Convert to fibre and run cables across an extra-long distance-up to 50 kilometres or more! • Have an Ethernet switch with RJ-45 ...

...a special port on a switch or other network device to convert the port to a copper or fiber interface. These compact transceivers replace the older, bulkier GBIC interface. Although these devices are available in copper, their most common use is...

...With the development of switched Ethernet and faster variants of Ethernet, the token ring networks have since declined in usage and the standards activity has since come to a standstill as 100Mbps switched Ethernet has dominated the LAN/layer 2 netw...

...An extender or a switch in between? • But what happens if there is an extender or a switch in between? A lot of them do not support DDC at all or only with certain limitations. This may cause PCs not to boot up at all or show no video. Someti...

...cross-point or fabric-switched topology uses 24-bit addressing to connect up to 2 (to the 24th) devices in a cross-point switched configuration. This enables many devices to communicate at the same time and does not require shared media. • Fibre C...

...DDC with extender or switch • But what happens if there is an extender or a switch in between? A lot of them do not support DDC at all or only with certain limitations. This may cause PCs not to boot up at all or show no video. Sometimes only a s...