...HDBaseT supports all key HDMI 1.4 features, including EPG, Consumer Electronic Controls (CEC), EDID, and HDCP. The unique video coding scheme ensure the highest video quality at zero latency. • Audio • As with the video, HDBaseT audi...

...digital video, it is supported only from digital devices with DVI, HDMI or DisplayPort interface. If you try to be smart and connect a Blue-ray player together with an analog devices (eg VGA or component video), the HDCP protection prevents an im...

...the SingleLink is supported by 23/24" displays, commonly called Full HD panels. The DualLink resolutions require larger screen sizes of typically 27" (2560x1440), 30" (2560x1600) or square ATC displays of 2048x2048 pixels. • Full 4K resolution...

...with traditional USB support disconnect the USB lines from one computer before connect it to the next. But that way switch over delay were often experienced. And switch systems can sometimes hang due to bugs in the computers, peripherals or hubs....

...based on the detection of fixed attributes of the different devices. Thus standard option will be recognized and supported while the specials like extended keyboards with buttons for umpteen extra functions and similar tasks will not be supported.

...premises applications supporting Ethernet rates of 10 Mbps to 1 Gbps. They are also typically used with LED transmitters. OM1 and OM2 cable are not suitable though for today's higher-speed networks. • OM3 and OM4 are both laser-optimized multimode...

...networks. • 10-GBE supports existing Ethernet technologies • 10-GBE uses the same layers (MAC, PHY and PMD), and the same frame sizes and formats. But the IEEE 802.3ae spec defines two sets of physical interfaces: LAN (LAN PHY) and WAN (WAN PHY...

...SFPs, but refuse to support those devices when SFPs from another vendor are used with them. • The only way around this “lock-in” practice is to only buy network devices that accept standard SFPs from all vendors and to buy from vendors that supp...

...a connection cable that supports DDC transmission ( VGA: pins 12 an 15 need to be connected). • An extender or a switch in between? • But what happens if there is an extender or a switch in between? A lot of them do not support DDC at all or only wi...

...fiber strand. • SFPs support speeds up to 4.25 Gbps and are generally used for Fast Ethernet or Gigabit Ethernet applications. The expanded SFP standard, SFP+, supports speeds of 10 Gbps or higher over fiber. XFP is a separate standard that also ...